点击图片查看原图
“供应黄河防爆BLXK501-10-C防爆重锤限位器”参数说明
| 是否有现货： | 是 | 认证： | CCC |
| 类型： | 直行 | 结构： | 组合式 |
| 用途： | 起重设备用行程开关 | 型号： | BLXK |
| 规格： | 501-10-C | 商标： | 郎太 |
| 包装： | TSO2000 | 产量： | 50000 |
“供应黄河防爆BLXK501-10-C防爆重锤限位器”详细介绍
重锤限位器一种由装在电动葫芦卷扬外壳侧面的开关座、紧固在开关座上的限位开关、吊索绳、重锤组成的重锤式单向断火限位器。
其特征在于： 1.吊索绳一端固定在限位开关中的拉杆上，另一端穿过重锤上的孔并由紧定螺钉锁紧，重锤通过另一偏置孔空套在电动葫芦楔紧端的钢丝绳上，重锤端头装有锁绳盖板；
2.限位开关是由开关和接触器改装而成，拉杆在重锤的拉力下，使得触头处于闭合状态，导杆的上端穿过本体后装有复位弹簧和调整螺母，导杆通过一对弹簧与触桥相连组成快速通、断机构；
3.限位开关的触头分别串联接在电动葫芦的主电路中。
用途：双梁防爆起重机上限位开关。
防爆等级ExdllCT4。
Heavy hammer stop a installed in the electric hoist lifting the switch of the shell side, tighten the switch on the limit switch, sling rope, weight of hammer type one-way fire stop.
Whose character is: 1. The sling rope end fixed on the rod in the limit switch, on the other end through the weight of the hole and by a tight set screw locking, using a heavy hammer another an concone set on the wedge tight on the wire rope electric hoist, heavy hammer end rope with locking plate;
2. The limit switch is a modified switch and contactor, pull rod under the pull of a heavy hammer, make contact in the closed state, the top of the guide rod through the body after a reset spring and adjusting nut, guide bar are connected to the contact bridge by a pair of spring of rapid communication, broken bodies;
3. ? the limit switch contact
